10x12 Greenhouse for sale

12’×12′ Passive solar greenhouse

Included: Passive Solar Greenhouse with shelves, raised growing beds, thermostat, exhaust fan, heater, automatic venting system, custom made mortise and tenon door (you choose paint color), internal electrical wiring, and installation with rebar anchoring.

Price: $20,450*

*Includes $1,000 required deposit

 

 

Features Summary

  • Custom truss and top plate design is stronger than hurricane ties
  • Designed to withstand 100+ mph wind (industry standard is 60mph) and 100 lbs per square foot of snow.
  • Architectural design helps wind push the structure into the ground instead of knocking it down.
  • Gigavent automatic vent openers are rated for 60+ mph wind
  • All framing is constructed with screws instead of nails.
  • Constructed with 8mm twinwall polycarbonate (industry standard is 4.5mm).
  • Fasteners with metal/rubber washer on 12″ centers.
  • Metal trim on corners and ridge also utilizes screws with metal/rubber washer on 12″ centers. This seals all exposed corners from weather; the same system is used on modern houses/barns.
  • Every seam, interior and exterior, is caulked with waterproof sealant.
  • Cold weather exhaust fans stop entry of air/cold/heat into structure. The industry standard fans do not.
  • Cold weather exhaust fans are considerably quieter than the industry standard fans.
  • All wet areas and foundation are constructed with Alaskan cedar to resist decay for an average 50 years.
  • Custom designed anchors connect to concrete piers or 5′ rebar driven into the ground at opposing angles.

Features Summary

  • Custom truss and top plate design is stronger than hurricane ties
  • Designed to withstand 100+ mph wind (industry standard is 60mph) and 100 lbs per square foot of snow.
  • Architectural design helps wind push the structure into the ground instead of knocking it down.
  • Gigavent automatic vent openers are rated for 60+ mph wind
  • All framing is constructed with screws instead of nails.
  • Constructed with 8mm twinwall polycarbonate (industry standard is 4.5mm).
  • Fasteners with metal/rubber washer on 12″ centers.
  • Metal trim on corners and ridge also utilizes screws with metal/rubber washer on 12″ centers. This seals all exposed corners from weather; the same system is used on modern houses/barns.
  • Every seam, interior and exterior, is caulked with waterproof sealant.
  • Cold weather exhaust fans stop entry of air/cold/heat into structure. The industry standard fans do not.
  • Cold weather exhaust fans are considerably quieter than the industry standard fans.
  • All wet areas and foundation are constructed with Alaskan cedar to resist decay for an average 50 years.
  • Custom designed anchors connect to concrete piers or 5′ rebar driven into the ground at opposing angles.

What To Expect When THE Project Begins