12’×24′ Passive Solar Greenhouse

Included: Passive Solar Greenhouse with shelves, raised growing beds, thermostat, 2 custom exhaust fans, 5 Gigavent Solar Openers, 2 circulation fans and timer, heater, automatic venting system, custom made mortise and tenon door, internal electrical wiring, and installation with rebar anchoring.

Price: $34,450*

*Includes $2,000 required deposit

 

 

Features Summary

  • Custom truss and top plate design is stronger than hurricane ties
  • Designed to withstand 100+ mph wind (industry standard is 60mph) and 100 lbs per square foot of snow.
  • Architectural design helps wind push the structure into the ground instead of knocking it down.
  • Gigavent automatic vent openers are rated for 60+ mph wind
  • All framing is constructed with screws instead of nails.
  • Constructed with 8mm twinwall polycarbonate (industry standard is 4.5mm).
  • Fasteners with metal/rubber washer on 12″ centers.
  • Metal trim on corners and ridge also utilizes screws with metal/rubber washer on 12″ centers. This seals all exposed corners from weather; the same system is used on modern houses/barns.
  • Every seam, interior and exterior, is caulked with waterproof sealant.
  • Cold weather exhaust fans stop entry of air/cold/heat into structure. The industry standard fans do not.
  • Cold weather exhaust fans are considerably quieter than the industry standard fans.
  • All wet areas and foundation are constructed with Alaskan cedar to resist decay for an average 50 years.
  • Custom designed anchors connect to concrete piers or 5′ rebar driven into the ground at opposing angles.

Features Summary

  • Custom truss and top plate design is stronger than hurricane ties
  • Designed to withstand 100+ mph wind (industry standard is 60mph) and 100 lbs per square foot of snow.
  • Architectural design helps wind push the structure into the ground instead of knocking it down.
  • Gigavent automatic vent openers are rated for 60+ mph wind
  • All framing is constructed with screws instead of nails.
  • Constructed with 8mm twinwall polycarbonate (industry standard is 4.5mm).
  • Fasteners with metal/rubber washer on 12″ centers.
  • Metal trim on corners and ridge also utilizes screws with metal/rubber washer on 12″ centers. This seals all exposed corners from weather; the same system is used on modern houses/barns.
  • Every seam, interior and exterior, is caulked with waterproof sealant.
  • Cold weather exhaust fans stop entry of air/cold/heat into structure. The industry standard fans do not.
  • Cold weather exhaust fans are considerably quieter than the industry standard fans.
  • All wet areas and foundation are constructed with Alaskan cedar to resist decay for an average 50 years.
  • Custom designed anchors connect to concrete piers or 5′ rebar driven into the ground at opposing angles.

What To Expect When THE Project Begins